100 NM Greenhouse Curtain Motor (AA)

Available: In Stock
$300.00
Successful pre-order.Thanks for contacting us!

The next step up from the 60 NM greenhouse curtain motor is this 100 NM greenhouse curtain motor is designed to lift up to a 1750 sq. ft. single bar curtain or up to 875 sq. ft. double bar curtain (square footage measured Length X Width). There are multiple options for motor only or motor with guide wheel set. The 100 NM greenhouse curtain motor is great for light deprivation curtains (blackout systems) and roof vents. It is designed to provide more torque than the 60 NM motor to meet the drive necessary to pull heavier and larger curtains and vents. You can connect the motor to a controller box or use interface boxes to connect to your new or existing ventilation system.

Features

  • Single output, low voltage, DC motor
  • Interchangeable guide wheel set to switch between Left and Right Output
  • Add an adapter for your roll bar by clicking through the options below
  • Lifts up to a 1750 sq. ft. single bar curtain or up to a 875 sq. ft. double bar curtain
  • Innovative roll bar adapter system for multiple roll bar adapters
  • 4 Year Warranty for a lower total cost of ownership
  • Low-bind guide wheels for longer motor life
  • U.S. based tech support & repair options
  • Easy access limit switches (directional limits)
  • Motor Specifications: 24 VDC, 100 NM, 4.2A, 100 W, 3 RPM, 40 Rev, 0.78″ (20mm) OD output shaft

The next step up from the 60 NM greenhouse curtain motor is this 100 NM greenhouse curtain motor is designed to lift up to a 1750 sq. ft. single bar curtain or up to 875 sq. ft. double bar curtain (square footage measured Length X Width). There are multiple options for motor only or motor with guide wheel set. The 100 NM greenhouse curtain motor is great for light deprivation curtains (blackout systems) and roof vents. It is designed to provide more torque than the 60 NM motor to meet the drive necessary to pull heavier and larger curtains and vents. You can connect the motor to a controller box or use interface boxes to connect to your new or existing ventilation system.

Features

  • Single output, low voltage, DC motor
  • Interchangeable guide wheel set to switch between Left and Right Output
  • Add an adapter for your roll bar by clicking through the options below
  • Lifts up to a 1750 sq. ft. single bar curtain or up to a 875 sq. ft. double bar curtain
  • Innovative roll bar adapter system for multiple roll bar adapters
  • 4 Year Warranty for a lower total cost of ownership
  • Low-bind guide wheels for longer motor life
  • U.S. based tech support & repair options
  • Easy access limit switches (directional limits)
  • Motor Specifications: 24 VDC, 100 NM, 4.2A, 100 W, 3 RPM, 40 Rev, 0.78″ (20mm) OD output shaft